Constant Voltage LED Driver 100W With DALI Dimmable

Constant Voltage LED Driver 100W With DALI Dimmable

Technical details

LED Driver 100W 12V

• 12 V, 100 W

• THD performance in wide load range < 5 %

• Ripple and Noise 0.36V p-p

• Small cross section

• Push terminal for simple wiring

DALI Dimmable LED Driver 100W

A constant voltage led driver receives standard line voltage (100-277VAC). This is the type of power that is typically output from your wall outlets around the home. Constant Voltage Drivers switch this alternating current voltage (VAC) to a low direct current voltage (VDC). The driver always maintains a constant voltage no matter what kind of current load is put on it.

Product description:

• UL Indoor LED Driver

• Output voltage 12V

• Max. current 8000mA

• Max. output power 100 W

• Dimmable via PWM/0-10V/RX/Dali LED dimmers

• Nominal life-time up to 50,000 h

• 5-year Warranty

Typical application

• Cove lighting, facade accent lighting, ceiling integration,linear lighting.

Wiring guidelines

• The cables should be run separately from the mains connections and

mains cables to ensure good EMC conditions.

• The LED wiring should be kept as short as possible to ensure good EMC.

The max. secondary cable length is 2 m (4 m circuit).

• The LED Driver has no inverse-polarity protection on the secondary side.

Wrong polarity can damage LED modules with no inverse-polarity protection.

• Wrong wiring of the LED Driver can lead to malfunction or irreparable

damage.